Metal Roofing

A metal roof can easily outlast the house payments, and it handles our wet winters better than almost anything else. We install new metal roofs on existing homes across Tacoma and the South Sound, and we repair existing ones too. Every visit comes with a free written estimate and a straight answer on what your roof actually needs.

FREE ESTIMATES
|
METAL ROOF INSTALLATION & REPAIR
|
WA CONTRACTOR LICENSE #CANYORN741N8

Metal roof leaking after a storm?

Loose panels and wind damage can't wait. Read about our 24/7 emergency roof repair, or call us any time.

Metal Roofing Services For Tacoma And Pierce County Homes

Whether you want a new roof or need an old one fixed, here is how we can help.

Worker drilling into a gray corrugated metal roof under a blue sky

New metal roof installation

  • Hidden fasteners on most residential installs, so there are no screw holes for rain to find.
  • Panels that can move a little as the metal heats up and cools down, which keeps the seams tight.
  • The right underlayment for metal, installed over a solid deck.
Workers repairing a red roof beside a street with parked cars

Switching to metal

  • We tear the old roof off down to the wood. We never put metal over old shingles.
  • Any rotted boards get replaced before the new roof goes on.
  • We can price metal and shingles side by side so you can compare.
Brick chimney on a shingled roof with a ladder against it under a clear blue sky

Leak repair

  • We follow the water back to where it's actually getting in.
  • We fix them no matter who installed the roof.
  • You see photos of the problem before we start.
Worker in a white hard hat repairing a roof against a clear blue sky

Panels, seams, and screws

  • New screws and washers on screw-down roofs where the old ones have worn out.
  • Resealing and repairing seams that have opened up.
  • Replacing panels damaged by wind, branches, or impacts.
Damaged brick house with workers repairing a collapsed roof and debris on the lawn

Flashing and trim

  • Flashing around chimneys, skylights, walls, and valleys, where most leaks begin.
  • Pipe boots and roof vents sealed where they pass through the metal.
  • Trim at the ridge and eaves that keeps wind-driven rain out.

Thinking About a Metal Roof?

Tell us about your home and what you want from your next roof. We'll check the pitch, the trees nearby, and the wood underneath before we give you a price.

We can price shingles too, so you can compare.
Blue corrugated metal wall or fence with a dented lower section against a purple background

Signs Your Metal Roof Needs Attention

Metal roofs usually wear out slowly, one spot at a time. Watch for these:

  • Rust spots or orange streaks below screws or panel edges.
  • Screws backing out, or rubber washers that look cracked or flattened.
  • A seam that has lifted, or a panel that rattles in the wind.
  • Drips or stains near a chimney, skylight, or vent.
  • Dents or bent panels after a storm.
  • Water stains on the ceiling.
Most of these can be repaired. A free inspection will tell you for sure.

Repair, Replace, or Switch to Metal?

There are three ways this can go. What we find on your roof decides which one makes sense.

  • Repair it

    If the panels are in good shape and the problem is in one area, we fix that spot. That could be a few leaking screws, an open seam, loose flashing, or one dented panel.

  • Replace it

    If rust has eaten through panels in several places, the paint is gone across large areas, or the wood underneath is soft, new metal is the better use of your money.

  • Switch to metal

    If your shingle or cedar roof is worn out, now is the time to switch. The old roof has to come off anyway, so changing materials costs less now than it ever will.

We take photos of everything we find, so you can see it for yourself. And if shingles are a better fit for your home or budget, we'll price a shingle roof replacement instead.

Dark corrugated roof beneath a cloudy blue sky

How a Metal Roof Project Works

Black rounded rectangle/oval cropped at the bottom on a white background

Inspection and estimate

We look over the roof, the wood underneath, the attic vents, and anything that pokes through the roof. Then we give you the price and plan in writing.

Black rounded rectangle shape on a white background

Pick YOUR Panels & color

We'll show you the panel styles and colors available. Once you choose, we order the materials.

Black rounded rectangle shape on a white background

Tear-off and install

We remove the old roof and show you photos of any wood that needs replacing before we fix it. Then the new roof goes on, and we clean up every day.

Black rounded shape partially visible at the bottom against a white background

Final walkthrough

Once the job is done, we go over it with you and share close-up photos of the details. Where the product qualifies, we register the manufacturer warranty for you.

Most repairs only take one visit.

Panels torn loose in a storm? That's an emergency call, and we answer those 24/7.

How Metal Compares to Other Roofs

Metal isn't the right choice for every home. Here's a quick look at how it compares to the other roofs we install.

Dark metal standing-seam roof with intersecting slopes against a cloudy sky

Metal Roofing

Costs more up front but needs very little upkeep. It often lasts 50 years or more, and moss has a hard time growing on it.

Orange terracotta roof tiles with a central ridge line, viewed from above

Standing Seam vs. Screw-Down Metal

Standing seam metal roofing hides its fasteners under raised seams. Screw-down panels cost less, but the screws need checking as the washers age. We recommend standing seam for most homes.

Shadow patterns on gray rooftop shingles in bright sunlight

Asphalt Shingles

The lowest price and the most styles to choose from. Shingles need replacing sooner, and shaded roofs need regular moss treatment.

Cedar shake

The classic Northwest look, but it needs the most care. Many cedar owners switch to metal when it's time for a new roof.

Flat and Low Slope Sections

Flat areas need a membrane like TPO instead of metal or shingles. We can put TPO on a porch or addition and metal on the main roof.

Metal Roofing

Costs more up front but needs very little upkeep. It often lasts 50 years or more, and moss has a hard time growing on it.

Standing Seam vs. Screw-Down Metal

Standing seam metal roofing hides its fasteners under raised seams. Screw-down panels cost less, but the screws need checking as the washers age. We recommend standing seam for most homes.

Aerial view of a house with a pool beside a canal, surrounded by trees and lawn

What Goes Into the Price of a Metal Roof

We don't give prices over the phone, because every roof is different. Here's what affects the cost:



The size and shape of the roof matter most. Valleys, dormers, and skylights all add work. Steep roofs and tight spaces take longer. Thicker metal and better paint finishes cost more. If the wood under your old roof has rotted, it has to be replaced first. And the number of old layers coming off changes how much tear-off and disposal is needed.


Your written estimate lists each of these, so it's easy to compare with other bids.

Why Homeowners Choose Canyon for Metal Roofing

We're based at 5324 84 St E in Tacoma and work throughout Pierce County, South King County, Thurston and Kitsap counties, and beyond.

A Second-Generation Roofer

Our owner, Joshua Massey, grew up in the trade and has more than 25 years of roofing experience.

We Repair Metal, Too

Repairs are a big part of what we do, so we won't push a new roof you don't need.

Solid Wood Under Every Roof

We tear off the old roof and check the wood before any new metal goes on.

Free Written Estimates

With photos of your roof and a clear plan.

Licensed, Bonded, and Insured

Registered with Washington State, bonded, and insured on every job.

Metal Roofing Questions From Tacoma Homeowners

  • How much does a metal roof cost in Tacoma?

    It depends on the size and shape of your roof, the metal you pick, and the condition of the wood underneath. Metal costs more up front than asphalt shingles. We'll look at your roof in person and give you a free written estimate, so you know the full price before any work begins.

  • How long does a metal roof last in the Pacific Northwest?

    A well-installed one often lasts 50 years or more. That can be twice as long as a shingle roof. How long yours lasts depends on the paint finish, the flashing, and keeping debris off the roof. If you live near saltwater, ask about finishes made for that. The Metal Roofing Alliance has more information for homeowners.


  • What are the downsides of a metal roof?

    The biggest one is the higher upfront cost. Metal also needs an experienced installer, because mistakes usually show up as leaks around the flashing and seams. A large falling branch can dent a panel. Some people worry about rain noise, but with a solid deck and underlayment, most homeowners say it's no louder than other roofs.

  • Can you put metal over my existing shingles?

    We don't. We always remove the old roof first so we can check the wood, replace anything rotted, and put down new underlayment. Covering an old roof hides problems that can shorten the life of your new one.

  • Can a leaking metal roof be repaired?

    Usually, yes. Most leaks come from worn screw washers, an open seam, or loose flashing around a chimney, skylight, or vent. We find the source and fix it. We only suggest a new roof when the panels are rusted through or failing all over.

Construction worker in orange safety gear holding a clipboard beside a rooftop

Find Out If Metal Is Right for Your Home

Whether you're planning a new roof or dealing with a leak, it starts with a free inspection and a written estimate. If other parts of your roof need work, we can handle those roof repairs in the same visit. You can also compare metal with the other roofing materials we install. Call us Monday through Friday, 7:00 AM to 5:00 PM, with weekend appointments and 24/7 emergency service.